Construction First Aid Requirements in NZ: Kits, People, Training

New Zealand law sets no fixed number of first aid kits or first aiders for a construction site. It requires first aid that is adequate for the work, and on a building site that means more than a single kit in the site office. You need kits you can reach from every work area, enough trained people on every shift, and a way to restock after every use. We supply first aid kits, refills and consumables across New Zealand, so this guide covers the rules, then how to turn them into a kit list and a restocking routine.

Safewell
Keep Construction First Aid Supplies Ready
Safewell supplies workplace first aid kits, refills and consumables to help construction teams equip sites and restock after use.
Visit

TL;DR

  • Under WorkSafe’s guidance, you must provide at least one first aid kit for each workplace. A site spread over several areas or levels will usually need more than one.
  • The number of first aiders is a judgement based on risk, headcount, shifts and distance from medical help. Construction is high-risk work, so plan on more first aiders than an office would need.
  • Every worker needs to be told where the kits are, who the first aiders are and what to do when someone is hurt, starting at induction.
  • Match kit contents to site hazards such as cuts, crush injuries, eye injuries and burns, and assign one person to check and restock.
  • Industrial, lone worker and vehicle kits, plus refills, make it simple to cover a whole site and keep it compliant.

Table of Contents

What the law actually requires

The duty sits with the PCBU, the “person conducting a business or undertaking”. On a building site that is usually the main contractor, the subcontractors, or both, depending on who controls the work. WorkSafe’s First aid at work guide sets out what a PCBU must consider. It covers first aid equipment and facilities, access to trained first aiders, and giving workers clear information about the arrangements.

The standard is “adequate”, and WorkSafe expects you to work out what that means for your site. The guide points you to three questions:

  1. Do you have enough first aid kits and facilities?
  2. How many first aiders do you need, and what training should they have?
  3. Who is responsible for maintaining the kits?

You then review your answers regularly and whenever circumstances change. On a construction project the circumstances change often. A site goes from groundworks to framing to fit-out, headcount rises and falls, and new trades arrive. Your first aid plan needs a review each time the site changes.

If you want a plain-language walkthrough of the wider workplace rules, our guide to workplace first aid compliance in NZ covers the basics that apply to every business.

Why construction is treated as higher risk

WorkSafe’s guide asks you to weigh the type, severity and likelihood of injuries that your work could cause. Construction scores badly on all three. Sites involve work at height, powered tools, heavy materials, vehicles and plant, so a single incident can be serious as well as likely.

The guide’s own worked examples show the difference. A three-person IT company next to a medical centre can reasonably have no trained first aiders. A company building tiny houses with eight workers is described as high-risk and has two trained first aiders. A vineyard half an hour from medical help has two first aiders for every ten workers. These are illustrations of reasoning, not legal minimums, but they show where a small construction crew sits: well above an office.

Three factors push a site up the scale:

  • Distance from help. The guide flags workplaces that are a long way from emergency services, a medical centre or a hospital. A rural subdivision or a lifestyle-block build can be well outside quick ambulance reach.
  • Spread. The guide notes workers scattered over a wide area, or work over more than one floor or level. A multi-storey build or a long civil site fits that description exactly.
  • Who is on site. Count contractors, delivery drivers and visitors as well as your own staff, and allow for first aiders being away sick or on leave.

How many first aiders a construction site needs

There is no single legal ratio. Anyone quoting “one per ten” as the law is giving you a rule of thumb, not a regulation. What you can do is work through the factors WorkSafe lists and write down the result.

A practical way to work it out

  1. Count the maximum number of people who could be on site at once, including subcontractors.
  2. Map the shifts. If crews start early or work late, every shift needs cover. Night and out-of-hours workers must be able to reach first aid equipment and first aiders too.
  3. Allow for absence. If you need two first aiders present at all times, train more than two.
  4. Look at the layout. Separate buildings, levels or remote corners of a large site may each need their own first aider within quick reach.
  5. Consider the hazards. Work at height, hot work, excavations and heavy plant all raise the case for more trained people and better equipment.
  6. Consult your workers and their health and safety representatives, as the guide says you should.

A simple worked example: a framing crew of 12 on a two-storey build, 40 minutes from the nearest medical centre, working a single shift. Two first aiders on site at all times is a reasonable starting point, which in practice means training three or four so that sickness or a day off does not leave the site uncovered. Add a subcontractor team and the number goes up. That is judgement, not a formula, and the plan should show the reasoning.

Training

WorkSafe recommends that first aiders are trained by an organisation accredited by the New Zealand Qualifications Authority (NZQA). The guide notes that a first aid certificate is generally valid for two years, and that first aiders should do refresher training after that to keep their knowledge current. Put expiry dates in a register and book refreshers ahead of time, because a lapsed certificate is easy to miss when the site is busy.

First aid kits: what a construction site needs

The baseline is clear. WorkSafe’s guide says you must provide at least one first aid kit for each workplace and make sure workers know where it is. Beyond that, the guide asks you to think about the number and location of kits, and what else the work requires. Contents should reflect the risks you identified.

For construction, that translates into a few practical decisions.

One kit is rarely enough

A single kit in the site shed leaves the person on the third level, or at the far end of a long site, a long way from help. Think in terms of zones. Put a kit in each work area or level where people can reach it quickly, one in the site office or sheds, and one in each work vehicle.

Pick kits that suit the environment

Sites are wet, dusty and rough on equipment. A hard or tough soft case that survives being thrown in a ute is more useful than a delicate one. Our range covers the main situations:

You can browse the full set on our workplace and industry first aid kits page.

Match contents to the injuries you expect

WorkSafe’s approach is to assess the risks first and let the kit follow. Think through what could go wrong on your site:

Site hazard Injury to plan for What the kit area needs to handle
Power tools, sharp materials Cuts and lacerations Bleeding control, dressings, bandages
Grinding, cutting, dust Eye injuries Eye care supplies and a way to protect the injured eye
Falls, manual handling Sprains, fractures Support and immobilisation items
Hot work, hot bitumen, chemicals Burns Burn care supplies
Heavy plant, vehicles, work at height Serious trauma More advanced trauma items and trained first aiders

This table is a way to structure your thinking, not a legal list. If you want a kit built around more serious injuries, the trauma kit above is designed for that purpose. For large gatherings or major incidents, our comprehensive emergency mass incident first aid kit is aimed at up to 25 injured people.

Putting kits where they will be used

A well-stocked kit locked in a container does nothing for someone hurt on level two. These habits keep a kit useful:

  • Mark the location. Use clear signage and put the location on your site map and induction material.
  • Keep kits reachable at all hours. WorkSafe’s guide says everyone must be able to reach first aid equipment, including workers on night shifts or outside normal hours.
  • Keep one in each vehicle. Crews who drive between sites are in effect a lone or remote workforce.
  • Move kits as the site changes. When scaffolding goes up, a stair is closed or a new building starts, check whether your kit locations still make sense.

Telling workers about first aid

This is the requirement most often missed. The guide says all workers must receive clear information about the first aid available, including where the kits are, who the first aiders are and where they can be found, where a first aid room is if there is one, and what to do when they need first aid. It should be given when someone starts, and again when the nature or location of their work changes.

On a construction site, that means a first aid section in the site induction and an up-to-date list of first aiders on the noticeboard. Put first aider names where the whole crew will see them, and update the list whenever someone leaves or a certificate expires.

Do you need a first aid room?

The guide says some workplaces may need a first aid room as well as kits. It depends on the type and frequency of likely injuries, the number of people on site, and how far you are from medical care. A small renovation crew will not. A large, long-running project with many workers probably will want a defined, accessible space where someone can be treated and kept comfortable until an ambulance arrives. Make the call as part of your risk assessment and record why.

Treatment couch inside a site first aid room

Keeping the kit compliant: checks and restocking

A kit that was complete in January can be short of stock by March. Dressings get used, sterile items pass their dates, and contents go missing. WorkSafe’s guide asks you to decide who is responsible for maintaining kits, so name one person per site and write it down.

A workable routine:

  1. Check every kit on a fixed schedule. Monthly is a sensible starting point on an active site, and always after an incident.
  2. Record the check. A tick-sheet inside the lid shows the date, the person and what was replaced.
  3. Replace what was used straight away. Do not wait for the next scheduled check.
  4. Watch expiry dates on sterile and time-limited items.
  5. Restock from a matching refill. Buying a refill for the same kit keeps the contents consistent across your site, so every crew knows what is in each kit. For example, there are refills for the industrial and marine kit and for the 1 to 25 person trauma kit.

As a cost point, the guide notes that a PCBU must not charge workers for things provided for their health and safety, which includes first aid kits and facilities. Budget for kits, refills and training as a normal project cost.

After first aid: what happens next

First aid is the care given before a doctor, other health professional or emergency services take over. WorkSafe’s guide describes its focus as preserving life and minimising serious injury, for example stopping bleeding, maintaining breathing and circulation, and stabilising broken arms or legs. For anything beyond a minor injury, call 111 first and keep treating until help arrives.

Your plan should cover what comes after: a named person who calls the ambulance, someone who meets it at the gate and directs it to the injured worker, and a record of the incident. Once the worker is treated, follow-up care matters too. If you want to understand what recovery involves, these post-accident recovery steps explain how immediate care leads on to assessment and professional treatment.

After first aid: what happens next

Sorting out your site’s first aid in one place

Most builders and contractors would rather not piece together first aid supplies from several sources. We supply first aid kits, refills, medical supplies and emergency response equipment to workplaces across New Zealand, with New Zealand-wide delivery. Industrial and marine kits, lone worker and vehicle kits, wall-mountable boxes and refills all sit in the same range, so you can equip the site office, the work zones and the vehicles, then reorder consumables as they run down.

First Aid Kit Premium Lone Worker In Large Soft Pack Bag

If you are setting up a new site or reviewing an existing one, start with our first aid kits for workplaces and industry, or look through the full product categories to add spill management, safety and hygiene items, and healthcare waste supplies to the same order.

A short checklist for your site

  • Risk assessment done, covering injury types, severity and likelihood.
  • First aider numbers set per shift, with allowance for absences.
  • First aiders trained by an NZQA-accredited provider, with expiry dates tracked.
  • At least one kit per workplace, plus kits in work zones and vehicles.
  • Kit contents matched to your hazards.
  • Kit locations signed and shown on the site map.
  • Workers told about first aid at induction and whenever work changes.
  • A named person responsible for checking and restocking.
  • Plan reviewed whenever the site, headcount or work type changes.

FAQ

Is a construction site legally required to have a first aid kit?

Yes. WorkSafe’s guidance says you must provide at least one first aid kit for each workplace and make sure workers know where it is. On a larger or spread-out site you will usually need more than one, because the duty is to provide first aid that is adequate for the work.

How many first aiders do I need on a building site?

There is no fixed number in law. You decide based on risk, the number of workers, shifts, site layout and distance from medical help. WorkSafe’s examples show a high-risk eight-person building firm with two trained first aiders, so a construction crew should plan for more than an office would.

How long does a first aid certificate last?

WorkSafe’s guide says a first aid certificate is generally valid for two years, after which first aiders should complete refresher training. Keep a register of expiry dates so the site is never left without a current first aider.

What should a construction site first aid kit contain?

The contents should follow the injuries your site could cause, such as cuts, eye injuries, burns, sprains, fractures and more serious trauma. Assess the hazards first, then choose kits that cover them. Higher-risk or remote sites suit a kit with more advanced trauma items and trained first aiders to use them.

Who is responsible for first aid on a site with several contractors?

Each PCBU has duties for the workers it controls, and on a shared site the parties need to agree who provides what. Settle this in writing before work starts, so nobody assumes another contractor has covered the kits or the first aiders.

Sources

This article was produced with AI assistance and reviewed for accuracy. It is provided for general information only and is not professional advice.